User Manual

GDS-3000 Series User Manual
188
USB/RS-232C Remote Control Software
Terminal
application
(USB/RS-232C)
Invoke the terminal application such as MTTTY
(Multi-Threaded TTY). For RS-232C, set the COM
port, baud rate, stop bit, data bit, and parity
accordingly.
To check the COM port No, see the Device
Manager in the PC. For WinXP, Control panel →
System → Hardware tab.
Functionality
check
Run this query command via the terminal.
*idn?
This should return the Manufacturer, Model
number, Serial number, and Firmware version in
the following format.
GW, GDS-3152, 000000001, V1.00
PC Software
(USB only)
The proprietary PC software FreeWave is
downloadable from the GWInstek website for
remote control.