User Manual

GDS-3000 Series User Manual
184
7. Connect the RS-232C cable
to the rear panel port: DB-9
male connector. For a
functionality check, see page
188.
Pin assignment 1 2 3 4 5
6 7 8 9
2: RxD (Receive data)
3: TxD (Transmit data)
5: GND
4, 6 ~ 9: No connection
PC connection
Use the Null Modem connection as in the below
diagram.
Configure the Ethernet Interface
Ethernet
configuration
MAC Address Domain Name
Instrument Name DNS IP Address
User Password Gateway IP Address
Instrument IP
Address
Subnet Mask
HTTP Port 80 (fixed)
Background
The Ethernet interface is used for firmware
upgrades and remote control over a network.