User Manual

INTERFACE OVERVIEW
9
Background
The Ethernet interface is used remote control over
a network and retrieve scope’s screen shot, system
information etc,. Please note that the all GDS-3000
series were designed with a build-in web server.
Panel operation
1. Press the Utility key.
2. Press I/O from the bottom menu.
3. Press Ethernet from the side menu.
4. Set DHCP/BOOTP to On or Off
from the side menu.
Note
IP addresses will automatically be assigned with
DHCP/BOOTP set to on. For Static IP Addresses,
DHCP/BOOTP should be set to off.