User Manual

GDS-3000 Programming Manual
6
Interface Configuration
Configure USB Interface
USB
configuration
PC side connector
Type A, host
GDS-3000 side
connector
Type B, slave
Speed
1.1/2.0 (Full speed)
USB Class
CDC (communications device
class)
Panel operation
1. Press the Utility key.
2. Press I/O from the bottom menu.
3. Press USB Device Port from the
side menu and choose Computer.
4. Press Computer from the side
menu.
5. Connect the USB cable to the rear
panel slave port.
6. When the PC asks for the USB driver, select
dso_vpo.inf downloadable from GW website,
www.gwinstek.com, the GDS-3000 product
corner. The driver file automatically sets the
GDS-3000 as a serial COM port.