User Manual

QUICK REFERENCE
53
Default Settings
The default factory installed settings can be
recalled at any time by pressing the Default Setup
key.
Acquire
Mode: Sample XY: OFF
Sample mode: ET Delay: On
Sample rate: 250MSPS
Display
Mode: Vector Persistence: 100ms
Waveform intensity: 50%
Graticule intensity: 50%
Waveform visuals: Gray Graticule: full
Channel
Scale: 100mV/Div CH1: On
Coupling: DC Impedance: 1MΩ
Invert: Off Bandwidth: full
Expand: By ground Position: 0.00V
Probe: voltage Probe attenuation: 1x
Deskew: 0s
Cursor
Horizontal cursor: Off Vertical Cursor: Off
Measure
Source: CH1 Gating: Off
Display: Off
Horizontal
Scale: 10us/Div
Math
Source1: CH1 Operator: +
Source2: CH2 Position: 0.00 Div
Unit/Div: 200mV Math Off
Test
App: Go-NoGo
Trigger
Type: Edge Source: CH1
Coupling: DC Alternate: Off