User Manual

GDS-3000 Series User Manual
26
Date and Time
Current date and time (page 145).
Memory bar
The ratio and the position of the
displayed waveform compared
with the internal memory (page
114).
Trigger status
Triggered.
Not triggered, display not updated.
Indicates the pre-trigger is active.
Trigger stopped. Also appears in
Run/Stop (page62).
Roll mode.
Autoset mode.
For trigger details, see page 126.
Acquisition mode
Normal mode
Peak detect mode
Hi Resolution
Average mode
For acquisition details, see page 101.
Input signal
frequency
Shows the input signal
frequency.
Indicates the frequency is
less than 2Hz (lower
frequency limit).