User Manual

ManualsBrandsGW Instek ManualsBenchtop OscilloscopesOscilloscope, 4x 150MHz, 5GSPS

REMOTE CONTROL CONFIG

185

Panel operation

1. Press the Utility key.

2. Press I/O from the bottom menu.

3. Press Ethernet from the side menu.

4. Set DHCP/BOOTP to On or Off

from the side menu.

Note

IP addresses will automatically be assigned with

DHCP/BOOTP set to on. For Static IP Addresses,

DHCP/BOOTP should be set to off.

5. Use the Up and Down arrows on

the side menu to navigate each

Ethernet configuration item.