User Manual

CONFIGURATION
103
Show Waveform in XY Mode
Background
The XY mode maps the voltage of channel 1 or
channel 3 to the voltage of channel 2 or 4. This
mode is useful for observing the phase relationship
between waveforms.
Connection
1. Connect the signals to
Channel 1 (X-axis) and
Channel 2 (Y-axis) or
Channel 3 (X2-axis) and
Channel 4 (Y2-axis).
2. Make sure a channel pair is active
(CH1&CH2 or CH3&CH4). Press
the Channel key if necessary. A
channel is active if the channel key
is lit.
Panel operation
1. Press the Acquire menu key.
2. Press XY from the bottom menu.
3. Choose Triggered XY from the side
menu.