Datasheet

7. Press the “Select Segments” button at the bottom of the screen, then
choose the interval range of each segment from “Num of Seg” on the
right-hand side of the screen. If users want to choose the maximum
segments, 2048 sets, they may press “Set to Maximum” button to set up
the 2048 sets as maximum.
8. Press the “Segments Run” button at the bottom of the screen, then
the oscilloscope will run the test within segments; after the
measurement, press “Segments Stop”.
9. Press the “Current Seg” at the upper-right hand side on the screen,
then users can adjust the anticipated segments by rolling Variable knob.
Set Segments to
maximum “2048”