User manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- QUICK REFERENCE
- Menu Tree / Operation Shortcuts
- Convention
- Acquire Key
- Acquire Key - Segments
- Autoset Key
- CH1 ~ 4 Key
- Cursor Key
- Display Key
- Help Key
- Math Key
- Measure Key
- Hardcopy Key
- Run/Stop Key
- REF Key
- Save/Recall Key
- Test Key
- Test Key – Go-NoGo
- Trigger Type Menu
- Trigger Edge Menu
- Trigger Delay Menu
- Trigger Pulse Width Menu
- Trigger Video Menu
- Trigger Pulse Runt Menu
- Trigger Rise & Fall Menu
- Trigger Timeout Menu
- Utility Key
- Utility Key – I/O
- Utility Key – File Utilities
- Utility Key – Wave Generator - Demo Outputs
- Search - Edge
- Search – Pulse Width
- Search - Runt
- Search – Rise/Fall Time
- Zoom Key
- Option Key
- Default Settings
- Built-in Help
- Menu Tree / Operation Shortcuts
- MEASUREMENT
- CONFIGURATION
- OPTIONAL SOFTWARE and APPS.
- SAVE/RECALL
- FILE UTILITIES
- HARDCOPY KEY
- REMOTE CONTROL CONFIG
- MAINTENANCE
- FAQ
- I connected the signal but it does not appear on the display.
- I want to remove the (Measurement result / FFT result / Help contents) from the display.
- The waveform does not update (frozen).
- The probe waveform is distorted.
- Autoset does not catch the signal well.
- I can’t save files to the internal memory.
- The display image printout is too dark on the background.
- The date and time settings are not correct.
- The accuracy does not match the specification.
- APPENDIX
- INDEX
GDS-2000A Series User Manual
44
Acquire Key
Sets the acquisition mode.
Segments
Goes to the Segments menu
Reset H
Position to 0s
XY ET
Sample rate
XXXMSPS
OFF(YT)
Triggered
XY
ET
Sin(x)/x
Mode
Sample
Peak Detect
2,4,8,16,32,64,
128,256
Average
Off, 1% ~ 49%
of sample rate,
Off
Digital Filter
Record
Length
Auto
Short
Acquire
Segments
Acquire Key - Segments
Setup the Segmented Memory function.
Segmented
Select
Segments
Analyze
Segments
Save
Segmented
Segments
Stop
Run
On
Off
Display All
1~2048
Current Seg
Segment
Time
Go Back
On
Off
1~2048
Num of Segs
Set to Maximum
Set to Minimum
Segments
Measure
Segments
Info
CH1~CH4
D0~D15
From
Select
Segmented
To File
DSXXX.CSV
Save Now
File Utilities
Sements Info
Turns on the segments information
overlay.
Segments
Measure
File Utilties
Goes to the File Utilities menu
1~2048
Start
1~2048
End
Set to Minimum
Set to Maximum
Go Back
Off
Plot Source
1~2048
Select
1~20
Divided
Off
1~2048
Select
Save Meas.
to File
CH1~CH4
Source