User manual

COMMAND DETAILS
81
Measurement Commands
:MEASUrement:MEAS<X>:SOURCE<X> ....................81
:MEASUrement:MEAS<X>:TYPe ................................ 82
:MEASUrement:MEAS<X>:VALue.............................. 82
:MEASUrement:MEAS<X>:MAXimum ...................... 83
:MEASUrement:MEAS<X>:MEAN ............................. 84
:MEASUrement:MEAS<X>:MINImum ...................... 84
:MEASUrement:STATIstics:MODe ............................ 85
:MEASUrement:STATIstics ........................................ 85
:MEASUrement:DISPlay ............................................. 86
:MEASUrement:MEAS<X>:SOURCE<X>
Description
Sets or queries the measurement source for a
selected automatic measurement. This is a statistics
related command.
Syntax
:MEASUrement:MEAS<X>:SOURCE<X> { CH1 | CH2 |
MATH | ? }
Related
commands
:MEASUrement:MEAS<X>:TYPe
Parameter
MEAS<X>
The automatic measurement number
from 1 to 4.
SOURCE<X>
SOURCE1: Source#1 for all single
channel measurements.
SOURCE<X>
SOURCE2: Source#2 for all delay or
phase measurements.
CH1 to CH2
Channel 1, 2
MATH
Math source
Return parameter
CH1 to CH2
Channel 1, 2
MATH
Math source
Set
Query