User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Utility Commands
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Go_NoGo Commands
- Replay Commands
- Rotate Commands
- DMM Commands
- APPENDX
- INDEX
COMMAND DETAILS
51
:CURSor:XY:POLar:THETA:DELta
Description
Queries the polar angle delta between cursor1 and
cursor2.
Syntax
:CURSor:XY:POLar:THETA:DELta?
Return parameter
<NR3>
Returns the theta delta between cursor1
and cursor2.
Example
:CURSor:XY:POLar:THETA:DELta?
9.10E+0
Returns the delta as 9.1˚.
:CURSor:XY:PRODuct:POSition<X>
Description
Queries the product in XY mode for the specified
cursor, where x can be either 1 or 2.
Syntax
:CURSor:XY:PRODuct:POSition<X>?
Parameter
<X>
1, 2 (Cursor 1, Cursor 2)
Return parameter
<NR3>
Returns the product value of the Cursor1 or
Cursor2.
Example
:CURSor:XY:PRODuct:POSition1?
9.44E-5
Returns the product of cursor1 as 94.4uVV.
:CURSor:XY:PRODuct:DELta
Description
Queries the product delta in XY mode.
Syntax
:CURSor:XY:PRODuct:DELta?
Return parameter
<NR3>
Returns the product delta.
Example
:CURSor:XY:PRODuct:DELta?
1.22E-5
Returns the product delta as 12.2uVV.
Query
Query
Query