User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Utility Commands
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Go_NoGo Commands
- Replay Commands
- Rotate Commands
- DMM Commands
- APPENDX
- INDEX
GDS-200 & GDS-300 Programming Manual
128
Related
commands
:MEASUrement:DISPlay
Return parameter
<string>
Returns the measurement or value on
the display as a string.
Example
:DMM:VALue?
0.000
Returns the value on the DMM display.
:DMM:HOLD
Description
Sets or queries the Hold function status.
Syntax
:DMM:HOLD { ON | OFF | ?}
Parameter/Return
parameter
ON
Turns the Hold function on.
OFF
Turns the Hold function off.
Example
:DMM:HOLD ON
Turns the Hold function on.
:DMM:MOD
Description
Sets or queries the DMM mode.
Syntax
:DMM:MOD
{ DCV | DCMV | ACV | ACMV | DCA | DCMA | ACA |
ACMA | OHM | DIODE | BEEP | TEMPerature | ?}
Parameter/Return
parameter
DCV
DCV mode
DCMV
DCMV mode
ACV
ACV mode
ACMV
ACMV mode
DCA
DCA mode
DCMA
DCMA mode
ACA
ACA mode
ACMA
ACMA mode
Set
Query
Set
Query