User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Utility Commands
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Go_NoGo Commands
- Replay Commands
- Rotate Commands
- DMM Commands
- APPENDX
- INDEX
COMMAND DETAILS
121
:TEMPlate:MODe
Description
Sets or returns the Go/NoGo template mode.
Syntax
:TEMPlate:MODe {MAXimum|MINimum|AUTO|?}
Parameter/
Return Parameter
MAXimum
Maximum template
MINimum
Minimum template
AUTO
Auto template
Example
:TEMPlate:MODe AUTO
Sets the template mode to AUTO.
:TEMPlate:MAXimum
Description
Defines or queries which waveform memory
(REF1 or W1~W20) is set to the maximum
template.
Syntax
:TEMPlate:MAXimum {REF1|W1~W20|?}
Parameter/
Return Parameter
REF1
Reference one
W1~W20
Waveform memory 1 to 20
Example
:TEMPlate:MAXimum REF1
Saves the maximum template to REF1.
:TEMPlate:MINimum
Description
Defines or queries which waveform memory
(REF2 or W1~W20) is set to the minimum
template.
Syntax
:TEMPlate:MINimum {REF2|W1~W20|?}
Parameter/
Return Parameter
REF2
Reference one
W1~W20
Waveform memory 1 to 20
Example
:TEMPlate:MINimum REF2
Saves the minimum template to REF2.
Set
Query
Set
Query
Set
Query