User manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- OPERATION
- REMOTE CONTROL CONFIG
- FAQ
- I connected the signal but it does not appear on the display.
- I want to remove the measurement or FFT results from the display.
- The waveform does not update (frozen).
- The probe waveform is distorted.
- Autoset does not catch the signal well.
- The date and time settings are not correct.
- The accuracy does not match the specification.
- APPENDIX
- INDEX
OPERATION
143
DMM Mode
The DMM function can be used simultaneously with the DSO
function. The DMM function is a basic digital multimeter. By
default the DMM measurements are hidden in landscape mode. In
the vertical display mode the DMM functions and measurements
are displayed on the bottom of the screen automatically.
Accessing the Multimeter
There are two methods to access the DMM. Most of these instructions
assume that the scope is in the vertical mode. See page 34 to switch to
the vertical mode.
First Method: From the main screen, press the title bar to bring up the
Drop Down menu. Press the DMM icon to show the multimeter settings.
Menu tray
DMM
Icon
Multimeter setting