User manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- OPERATION
- REMOTE CONTROL CONFIG
- FAQ
- I connected the signal but it does not appear on the display.
- I want to remove the measurement or FFT results from the display.
- The waveform does not update (frozen).
- The probe waveform is distorted.
- Autoset does not catch the signal well.
- The date and time settings are not correct.
- The accuracy does not match the specification.
- APPENDIX
- INDEX
OPERATION
135
Recall Operations
The Recall function configures the save file destination, file format
and in the case of image files, the on-screen items that should be
saved.
Note
Files can only be recalled if the USB port is
configured to “Communication”. See page 102
for details.
Accessing the Recall Menu
From the main screen, press the title bar to bring up the Drop Down
menu. Press the Recall icon to show the Recall menu.
Menu tray
App tray
Recall
Recalling Waveform Files
Background
Waveforms can be recalled from either the
internal memory slots (wave1 - wave20) or files
saved in the LSF or CSV file formats.