User manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- OPERATION
- REMOTE CONTROL CONFIG
- FAQ
- I connected the signal but it does not appear on the display.
- I want to remove the measurement or FFT results from the display.
- The waveform does not update (frozen).
- The probe waveform is distorted.
- Autoset does not catch the signal well.
- The date and time settings are not correct.
- The accuracy does not match the specification.
- APPENDIX
- INDEX
GDS-200 & GDS-300 Series User Manual
128
9. To preview the image file before saving, press
the Preview button.
Example Image
File with Brief
Mode = On
Image
tab
Date&Time, Vertical,
Horizontal, Trigger
Cursor
Measure
Measurement
Note
Cursor
Saving and Configuring Waveform Files
Background
Each displayed waveform can be saved either
separately or together in a folder for later recall.
Waveforms can be saved from any of the source
channels, reference channels or math
waveform.
Waveform File
Items
From
Selects the waveform source
Destination
Selects the destination to save
the waveform.
Save Waveform
1. From the Save menu, press the Waveform tab.
2. To save, press the Save button at the bottom of
the Waveform tab.
The file will be saved into the configured file
path with the configured file format. See below
for the configuration details.