User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Utility Commands
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Go_NoGo Commands
- Replay Commands
- Rotate Commands
- DMM Commands
- APPENDX
- INDEX
GDS-200 & GDS-300 Programming Manual
98
Example
:TRIGger:COUPle AC
Sets the trigger coupling to AC.
:TRIGger:NREJ
Description
Sets or queries noise rejection status.
Syntax
:TRIGger:NREJ {OFF | ON | ?}
Parameter
OFF
Turns noise rejection off
ON
Turns noise rejection on
Return parameter
Returns the noise rejection status (ON, OFF).
Example
:TRIGger:NREJ ON
Turns noise rejection on.
:TRIGger:REJect
Description
Sets or queries the frequency rejection status.
Syntax
:TRIGger:REJect {OFF | HF | LF | ?}
Parameter
OFF
Frequency rejection off.
HF
High frequency filter on
LF
Low frequency filter on
Return parameter
Returns the status of the frequency filter.
Example
:TRIGger:REJect OFF
Turns the frequency filter off.
:TRIGger:MODe
Description
Sets or queries the trigger mode.
Syntax
:TRIGger:MODe {AUTo | NORMal | ?}
Parameter
AUTo
Auto trigger (Untriggered roll)
NORMal
Normal trigger
Set
Query
Set
Query
Set
Query