User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Utility Commands
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Go_NoGo Commands
- Replay Commands
- Rotate Commands
- DMM Commands
- APPENDX
- INDEX
COMMAND DETAILS
97
:TRIGger:TYPe
Description
Sets or queries the trigger type.
Syntax
:TRIGger:TYPe {EDGe | PULSEWidth | VIDeo | ? }
Parameter
EDGE
Edge trigger
PULSEWidth
Pulse width trigger
VIDeo
Video trigger
Return parameter
Returns the trigger type.
Example
:TRIGger:TYPe EDGE
Sets the trigger type to edge.
:TRIGger:SOURce
Description
Sets or queries the trigger source.
Syntax
:TRIGger:SOURce { CH1 | CH2 | ? }
Parameter
CH1 to CH2
Channel 1 to channel 2
Return parameter
Returns the trigger source.
Example
:TRIGger:SOURce CH1
Sets the trigger source to channel 1.
:TRIGger:COUPle
Description
Sets or queries the trigger coupling.
Note
Applicable for edge and pulse width triggers only.
Syntax
:TRIGger:COUPle {AC | DC | ?}
Parameter
AC
DC
Return parameter
Returns the trigger coupling.
Set
Query
Set
Query
Set
Query