User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Utility Commands
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Go_NoGo Commands
- Replay Commands
- Rotate Commands
- DMM Commands
- APPENDX
- INDEX
GDS-200 & GDS-300 Programming Manual
96
Trigger Commands
:TRIGger:FREQuency ................................................... 96
:TRIGger:TYPe ............................................................. 97
:TRIGger:SOURce ........................................................ 97
:TRIGger:COUPle ......................................................... 97
:TRIGger:NREJ ............................................................. 98
:TRIGger:REJect ........................................................... 98
:TRIGger:MODe ........................................................... 98
:TRIGger:HOLDoff ....................................................... 99
:TRIGger:LEVel ............................................................. 99
:TRIGger:EDGe:SLOP ................................................ 100
:TRIGger:PULSEWidth:POLarity ............................... 100
:TRIGger:VIDeo:TYPe ................................................ 100
:TRIGger:VIDeo:FIELd ............................................... 101
:TRIGger:VIDeo:LINe ................................................ 101
:TRIGger:VIDeo:POLarity .......................................... 102
:TRIGger:PULSe:WHEn ............................................. 102
:TRIGger:PULSe:TIMe ............................................... 103
:TRIGger:ALTernate ................................................... 104
:TRIGger:STATe ......................................................... 104
:TRIGger:FREQuency
Description
Queries the trigger frequency.
Syntax
:TRIGger:FREQuency?
Return parameter
<NR3>
Returns the trigger frequency.
Example
:TRIGger:FREQuency?
1.032E+3
Returns the trigger frequency.
Query