User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Utility Commands
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Go_NoGo Commands
- Replay Commands
- Rotate Commands
- DMM Commands
- APPENDX
- INDEX
GDS-200 & GDS-300 Programming Manual
88
Parameter
<X>
Reference waveform 1, 2
<NRf>
Horizontal co-ordinates
Return parameter
<NR3>
Returns the reference waveform position
Example
:REF1:TIMebase:POSition -5.000E-5
Selects reference 1, and then sets the horizontal
position to -50us.
:REF<X>:TIMebase:SCALe
Description
Sets or returns the selected reference waveform
time base scale.
Syntax
:REF<X>:TIMebase:SCALe { <NRf> | ?}
Related
commands
:REF<X>:DISPlay
Parameter
<X>
Reference waveform 1, 2
<NRf>
Horizontal scale
Return parameter
<NR3>
Returns the reference waveform scale.
Example
:REF1:TIMebase:SCALe 5.00E-4
Selects reference 1, and then sets the horizontal
scale to 500us/div.
:REF<X>:OFFSet
Description
Sets or returns the selected reference waveform
vertical position (offset).
Syntax
:REF<X>:OFFSet { <NRf> | ?}
Related
commands
:REF<X>:DISPlay
Parameter
<X>
Reference waveform 1, 2
<NRf>
Vertical offset
Return parameter
<NR3>
Returns the reference waveform vertical
position.
Set
Query
Set
Query