User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Utility Commands
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Go_NoGo Commands
- Replay Commands
- Rotate Commands
- DMM Commands
- APPENDX
- INDEX
GDS-200 & GDS-300 Programming Manual
56
:DISPlay:BRIGHTness
Description
Sets or queries the screen brightness.
Syntax
:DISPlay:BRIGHTness {<NRf> | ? }
Parameter
<NRf>
0.0E+0 to 1.0E+2 (0% to 100%)
Return Parameter
<NR3>
Returns the brightness.
Example
:DISPlay:BRIGHTness 100
Sets the brightness to 100%.
:DISPlay:ECO
Description
Sets or queries ECO mode status.
Syntax
:DISPlay:ECO {ON | OFF| ?}
Parameter
ON
Turns on the ECO mode.
OFF
Turns off the ECO mode.
Return parameter
Returns ON or OFF
Example
:DISPlay:ECO ON
Turns the ECO mode on.
:DISPlay:ECO:TIMe
Description
Sets or queries ECO time setting. The ECO mode
dims the display after a set amount of time.
Syntax
:DISPlay:ECO:TIMe {<NRf>| ?}
Parameter
<NRf>
1, 2, 5, 10, 30 minutes
Return parameter
<NR3>
Returns the ECO time
Example
:DISPlay:ECO:TIMe 10
Sets the ECO mode to minutes.
Set
Query
Set
Query
Set
Query