User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Utility Commands
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Go_NoGo Commands
- Replay Commands
- Rotate Commands
- DMM Commands
- APPENDX
- INDEX
GDS-200 & GDS-300 Programming Manual
50
:CURSor:XY:POLar:RADIUS:POSition<X>
Description
Queries the polar radius position for the specified
cursor in XY mode, where X can be either cursor 1 or
2.
Syntax
:CURSor:XY:POLar:RADIUS:POSition<X>?
Parameter
<X>
1, 2 (cursor 1, cursor 2)
Return Parameter
<NR3>
Returns the polar radius position.
Example
:CURSor:XY:POLar:RADIUS:POSition?
80.0E-3
Returns the polar radius position as 80.0mV.
:CURSor:XY:POLar:RADIUS:DELta
Description
Returns the radius delta value of cursor 1 and 2.
Syntax
:CURSor:XY:POLar:RADIUS:DELta?
Return Parameter
<NR3>
Returns the radius delta.
Example
:CURSor:XY:POLar:RADIUS:DELta?
31.4E-3
Returns the radius delta as 31.4mV.
:CURSor:XY:POLar:THETA:POSition<X>
Description
Queries the polar angle for the specified cursor in
XY mode, where X can be either 1 or 2.
Syntax
:CURSor:XY:POLar:THETA:POSition<X>?
Parameter
<X>
1, 2 (Cursor 1, Cursor 2)
Return parameter
<NR3>
Returns the polar angle.
Example
:CURSor:XY:POLar:THETA:POSition1?
8.91E+1
Returns the polar angle for cursor1 as 89.1˚.
Query
Query
Query