User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Utility Commands
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Go_NoGo Commands
- Replay Commands
- Rotate Commands
- DMM Commands
- APPENDX
- INDEX
COMMAND DETAILS
131
:DMM:TEMPerature:UNITs
Description
Sets the units for the temperature measurement
function. This command only applies to the GDS-
300.
Syntax
:DMM:TEMPerature:UNITs { Celsius | Fahrenheit | ? }
Parameter/Return
parameter
Celsius
Degrees Celsius
Fahrenheit
Degrees Fahrenheit
Example
:DMM:TEMPerature:TYPe Celsius
Sets the temperature measurement to ยบC.
:DMM:TEMPerature:TYPe
Description
Sets the type of thermocouple used for the
temperature measurement function. This
command only applies to the GDS-300.
Syntax
:DMM:TEMPerature:TYPe { TYPEB | TYPEE | TYPEJ |
TYPEK | TYPEN | TYPER | TYPES | TYPET | ? }
Parameter/Return
parameter
TYPEB
B
TYPEE
E
TYPEJ
J
TYPEK
K
TYPEN
N
TYPER
R
TYPES
S
TYPET
T
Example
:DMM:TEMPerature:TYPe K
Sets the temperature measurement function to use
the K type thermocouple.
Set
Query
Set
Query