User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Utility Commands
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Go_NoGo Commands
- Replay Commands
- Rotate Commands
- DMM Commands
- APPENDX
- INDEX
GDS-200 & GDS-300 Programming Manual
130
parameter
TIME3M
TIME6M
TIME15M
TIME30M
TIME1H
TIME3H
TIME6H
Example
:DMM:TIMe 6M
Sets the measurement interval time to 6M.
:DMM:CURSORPOS
Description
Sets the cursor position for trend plot in the
Advanced DMM function.
This command is only applicable when the Hold
function is turned on.
Syntax
:DMM:CURSORPOS { <NR1> | ? }
Parameter
<NR1>
0 ~ 400
Return parameter
<string>
Returns the cursor position (#data);
time at position; measurement value
at position
Example
DMM:HOLD ON
DMM:CURSORPOS 200
:DMM:CURSORPOS?
200;20.0s;0.0000V
Returns cursor position #200 @ 20s with a value of
0V.
Set
Query