User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Utility Commands
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Go_NoGo Commands
- Replay Commands
- Rotate Commands
- DMM Commands
- APPENDX
- INDEX
COMMAND DETAILS
129
OHM
Resistance measurement mode
DIODE
Diode tester
BEEP
Continuity tester
TEMPerature
Temperature measurement mode
Example
:DMM:MOD DCV
Sets the measurement mode to DCV.
:DMM:TRENDplot
Description
Resets the DMM trend plot.
Syntax
:DMM:TRENDplot {RESET}
Example
:DMM:TRENDplot RESET
:DMM:ADVanced
Description
Turns the advanced function on or off or returns
its status.
Syntax
:DMM:ADVanced { ON | OFF | ?}
Parameter/Return
parameter
ON
Turn Advanced DMM function on.
OFF
Turn Advanced DMM function off.
Example
:DMM:ADVanced ON
Turns the Advanced DMM function on.
:DMM:TIMe
Description
Sets or queries the interval time for the trend plot
data.
Syntax
:DMM:TIMe
{TIME40S|TIME3M|TIME6M|TIME15M|TIME30M|TI
ME1H|TIME3H|TIME6H}
Parameter/Return
TIME40S
Set
Set
Query
Set
Query