User manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- OPERATION
- REMOTE CONTROL CONFIG
- FAQ
- I connected the signal but it does not appear on the display.
- I want to remove the measurement or FFT results from the display.
- The waveform does not update (frozen).
- The probe waveform is distorted.
- Autoset does not catch the signal well.
- The date and time settings are not correct.
- The accuracy does not match the specification.
- APPENDIX
- INDEX
OPERATION
93
2. Press the Options icon to bring up the
options menu.
3. From the Options menu select the measurement
gating:
Gating
Off (Full Record), Screen, Between
Cursors
4. For Statistics, select the number of mean
samples. The number of samples is used to
calculate the Mean measurement for when the
automatic measurements are displayed in the
maximized mode.
Measurement
Gating
Mean
Samples
Measurement
option