User manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- OPERATION
- REMOTE CONTROL CONFIG
- FAQ
- I connected the signal but it does not appear on the display.
- I want to remove the measurement or FFT results from the display.
- The waveform does not update (frozen).
- The probe waveform is distorted.
- Autoset does not catch the signal well.
- The date and time settings are not correct.
- The accuracy does not match the specification.
- APPENDIX
- INDEX
GDS-200 & GDS-300 Series User Manual
8
Storage
environment
Location: Indoor
Temperature: -25°C to 70°C
Relative Humidity: <90%
Disposal
Do not dispose this instrument as unsorted
municipal waste. Please use a separate collection
facility or contact the supplier from which this
instrument was purchased. Please make sure
discarded electrical waste is properly recycled to
reduce environmental impact.
Battery
Type: Rechargeable Li-ion polymer
Model: FT8862103P
Manufacturer: Chinese Precision Technology
(Assembled in China)
Rating: 7.4Vdc
⎓
, 6100mAh (45 Watt)
Battery Caution
The internal battery should not be replaced by
the end-user. Please return the unit back to your
local dealer for assistance.
Never allow the battery to come in contact with
fire or water.
Discard used batteries according to the
manufacturer’s instructions or local laws.
Read the manual before use.