User manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- OPERATION
- REMOTE CONTROL CONFIG
- FAQ
- I connected the signal but it does not appear on the display.
- I want to remove the measurement or FFT results from the display.
- The waveform does not update (frozen).
- The probe waveform is distorted.
- Autoset does not catch the signal well.
- The date and time settings are not correct.
- The accuracy does not match the specification.
- APPENDIX
- INDEX
OPERATION
77
Example
Video Trigger
Background
The Video trigger allows you to acquire PAL,
NTSC and SECAM video signals. The GDS-
200/300 can trigger on any line or field.
Setup
1. Press the Video button.
Page 67
2. Press the Options icon to bring up the
Trigger options for the Video trigger.
Video trigger
Return
Source
Standard
Polarity Trigger On
Holdoff
3. Select the appropriate parameters. See page 69
for a description of each parameter.