User manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- OPERATION
- REMOTE CONTROL CONFIG
- FAQ
- I connected the signal but it does not appear on the display.
- I want to remove the measurement or FFT results from the display.
- The waveform does not update (frozen).
- The probe waveform is distorted.
- Autoset does not catch the signal well.
- The date and time settings are not correct.
- The accuracy does not match the specification.
- APPENDIX
- INDEX
GDS-200 & GDS-300 Series User Manual
72
Forced Trigger
Background
If the input waveforms are not triggered, they
can be force triggered using the Force Trigger
button.
From the Trigger menu, press the Force Trigger
button. The scope will trigger immediately.
Alternate Trigger
Background
The Alternate trigger allows the scope to trigger
alternatively between CH1 and CH2.
From the Trigger menu, press the ALT button.
A check will indicate if the ALT function is
active. The ALT function applies to all the
trigger types.