User manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- OPERATION
- REMOTE CONTROL CONFIG
- FAQ
- I connected the signal but it does not appear on the display.
- I want to remove the measurement or FFT results from the display.
- The waveform does not update (frozen).
- The probe waveform is distorted.
- Autoset does not catch the signal well.
- The date and time settings are not correct.
- The accuracy does not match the specification.
- APPENDIX
- INDEX
OPERATION
65
2. The horizontal position of the zoom window
can be moved by swiping the screen left or
right.
Zoom horizontal position
Zoom window
Note
Position: In the main display, the zoom window
will automatically snap to the zero position at each
crossing. To move past the zero position, use the
swipe gesture again.