User manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- OPERATION
- REMOTE CONTROL CONFIG
- FAQ
- I connected the signal but it does not appear on the display.
- I want to remove the measurement or FFT results from the display.
- The waveform does not update (frozen).
- The probe waveform is distorted.
- Autoset does not catch the signal well.
- The date and time settings are not correct.
- The accuracy does not match the specification.
- APPENDIX
- INDEX
OPERATION
61
By Trigger
Position
Scales the waveform from the
trigger position.
Steps
1. Access the Horizontal or Zoom
menu.
Page 59 or
63
2. Press the Options icon to bring up the
Horizontal options menu.
The expansion settings will be displayed.
Horizontal options menu
Expand settings
3. Choose the expansion type in the Expand menu
that appears.
Expand
By Center, By Trigger Position
Example: By
Center
Expand By Center
Trigger position