User manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- OPERATION
- REMOTE CONTROL CONFIG
- FAQ
- I connected the signal but it does not appear on the display.
- I want to remove the measurement or FFT results from the display.
- The waveform does not update (frozen).
- The probe waveform is distorted.
- Autoset does not catch the signal well.
- The date and time settings are not correct.
- The accuracy does not match the specification.
- APPENDIX
- INDEX
GDS-200 & GDS-300 Series User Manual
50
Vertical Menu Operation
The vertical menu controls the vertical scale and position, channel
activation, coupling, expansion modes and probe settings.
Vertical Icon Overview
Major settings that have been set in the vertical menu will be
reflected in the Vertical icon.
Channel
status
Coupling
Vertical scale
Bandwidth
limit status
Invert status
Reference
indicator
Math
indicator
Item
Description
Channel Status
Indicates if a channel is turned on.
Coupling
Indicates DC, AC or GND coupling.
Vertical Scale
Indicates the vertical scale.
Bandwidth
Limit Status
Indicates the bandwidth limit is turned on for that
channel.
Invert Status
Indicates that the channel waveform is inverted.
Reference
Indicator
Indicates that either R1 or R2 is turned on.
Math Indicator
Indicates that the Math function is turned on.