User manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- OPERATION
- REMOTE CONTROL CONFIG
- FAQ
- I connected the signal but it does not appear on the display.
- I want to remove the measurement or FFT results from the display.
- The waveform does not update (frozen).
- The probe waveform is distorted.
- Autoset does not catch the signal well.
- The date and time settings are not correct.
- The accuracy does not match the specification.
- APPENDIX
- INDEX
OPERATION
49
Example: keypad
Units
keypad
Delete
Enter
When using a keypad:
Select the unit
Enter the value using the keypad
Press Enter to confirm the entered value.
Example:
Keyboard
Text entry
area
OKEnter
Alphanumeric/Language/
symbol toggle
When using the keyboard:
The text entry area will display the text
that is entered.
The +=# key will bring up a symbol
keyboard
The ABC/Language key will bring up the
alphanumeric or native language
keyboard.
Press Enter to go to the next line.
Press OK to finish entering the text.