User manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- OPERATION
- REMOTE CONTROL CONFIG
- FAQ
- I connected the signal but it does not appear on the display.
- I want to remove the measurement or FFT results from the display.
- The waveform does not update (frozen).
- The probe waveform is distorted.
- Autoset does not catch the signal well.
- The date and time settings are not correct.
- The accuracy does not match the specification.
- APPENDIX
- INDEX
OPERATION
47
Common Menu UI Elements
This section will give a brief overview of some of the common UI
elements that are used to select parameters and values in menus.
Not all of the UI elements look the same but will have similar
functions. User interface elements that are not shown below will be
specifically shown in the user manual.
Radio Check Boxes
Background
A radio checkbox allows a single option to be
selected.
Example
Selected in
checkbox
Toggle Switches
Background
Toggle switches are used to turn options on or off.
Example
Off position
On position
Sliding Scales
Background
Sliders are used to quickly enter a value, on a
sliding scale. They are usually accompanied by
some common preset value buttons.