User manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- OPERATION
- REMOTE CONTROL CONFIG
- FAQ
- I connected the signal but it does not appear on the display.
- I want to remove the measurement or FFT results from the display.
- The waveform does not update (frozen).
- The probe waveform is distorted.
- Autoset does not catch the signal well.
- The date and time settings are not correct.
- The accuracy does not match the specification.
- APPENDIX
- INDEX
OPERATION
163
left and right to position the green edit window
and press the Edit button.
Each point within the edit window can
now be edited to a fine scale by drawing
on the screen.
Press OK when done.
7. To smooth the template press the Smooth
button.
Points will be removed to smooth the
template.
8. To save the template, press the Save button.
Choose to save the template to Ref1, Ref2
or as an *.LSF file.
9. After saving, you will be given the option to:
edit a new template, go directly to the Go-
NoGo function or to exit from the Template
editor.