User manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- OPERATION
- REMOTE CONTROL CONFIG
- FAQ
- I connected the signal but it does not appear on the display.
- I want to remove the measurement or FFT results from the display.
- The waveform does not update (frozen).
- The probe waveform is distorted.
- Autoset does not catch the signal well.
- The date and time settings are not correct.
- The accuracy does not match the specification.
- APPENDIX
- INDEX
OPERATION
153
3. The selected mode will be previewed in the
lower corner.
Temperature key/toggle
temperature unit
Multimeter
settings
Preview screen
Thermocouple type
4. Press anywhere outside of the multimeter
settings area to return to the main display.
Example
Temperature measurement
DMM mode
Max
Min
Hold on/off
Trend plot
(vertical view only)