User manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- OPERATION
- REMOTE CONTROL CONFIG
- FAQ
- I connected the signal but it does not appear on the display.
- I want to remove the measurement or FFT results from the display.
- The waveform does not update (frozen).
- The probe waveform is distorted.
- Autoset does not catch the signal well.
- The date and time settings are not correct.
- The accuracy does not match the specification.
- APPENDIX
- INDEX
GDS-200 & GDS-300 Series User Manual
138
Recalling Setups
Background
Setup files can be recalled from the internal Set
(setup) memories or from the internal disk.
Setup Recall
Items
From
Selects the source setup.
Recall Setup
1. From the Recall menu, press the Setup tab.
2. To recall, press the Recall button at the bottom
of the Setup tab.
The setup will be recalled from the configured
source. See below for the configuration details.
Setup
tab
Recall
button
From
3. Press From to set the source:
Set
Set 1 - Set 20
Press Edit label to set a label for
the selected setup slot.
File
Pressing File will allow you to
select a source file (XXXX.SET)
from the internal disk.