User manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- OPERATION
- REMOTE CONTROL CONFIG
- FAQ
- I connected the signal but it does not appear on the display.
- I want to remove the measurement or FFT results from the display.
- The waveform does not update (frozen).
- The probe waveform is distorted.
- Autoset does not catch the signal well.
- The date and time settings are not correct.
- The accuracy does not match the specification.
- APPENDIX
- INDEX
OPERATION
133
Saving and Configuring Images, Waveforms and Setups All
at Once
Background
Images, Waveforms and Setup files can all be
saved at the same time into a directory at the
same time using the All option.
All File Contents
All the files are saved, by default, to a directory
named AXXXX, where XXXX is a number that
is incremented each time a save operation is
performed.
AXXXX.PNG
Image file
AXXCH1/2.LSF
Waveform save file
DSXXXX.SET
Setup up file
Save All
1. From the Save menu, press the All tab.
2. To save, press the Save button at the bottom of
the All tab.
An image file, setup file and waveform files
will be saved into the configured destination.
See below for the configuration details.
All
tab
Save
button
Destination
3. Press Destination to set the destination: