User manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- OPERATION
- REMOTE CONTROL CONFIG
- FAQ
- I connected the signal but it does not appear on the display.
- I want to remove the measurement or FFT results from the display.
- The waveform does not update (frozen).
- The probe waveform is distorted.
- Autoset does not catch the signal well.
- The date and time settings are not correct.
- The accuracy does not match the specification.
- APPENDIX
- INDEX
GDS-200 & GDS-300 Series User Manual
116
Set the Graticule Type
Background
There are 4 types of selectable graticule.
Steps
From the Display menu press Graticule and
select the graticule type.
Full: Shows the full grid; X and Y axis
for each division.
Grid: Show the full grid without the X
and Y axis.
Cross Hair: Shows only the center X
and Y frame.
Frame: Shows only the outer frame.
Graticule
Menu