User manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- OPERATION
- REMOTE CONTROL CONFIG
- FAQ
- I connected the signal but it does not appear on the display.
- I want to remove the measurement or FFT results from the display.
- The waveform does not update (frozen).
- The probe waveform is distorted.
- Autoset does not catch the signal well.
- The date and time settings are not correct.
- The accuracy does not match the specification.
- APPENDIX
- INDEX
OPERATION
113
Vectors: Both the sampled
dots and the connecting
line are displayed.
Steps
From the Display menu press Type and select
the display mode.
Type
Vectors, Dots
Type
Menu
Set the Level of Persistence
Background
The Persistence function allows the GDS-
200/GDS-300 to mimic the trace of a traditional
analog oscilloscope. A waveform trace can be
configured to “persist” for a designated amount
of time.
Steps
From the Display menu press Persistence and
set the level of persistence with the slider or the
preset keys.
Persistence
Off, Short, Medium, Long,
Infinite
Persistence
Menu