User manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- OPERATION
- REMOTE CONTROL CONFIG
- FAQ
- I connected the signal but it does not appear on the display.
- I want to remove the measurement or FFT results from the display.
- The waveform does not update (frozen).
- The probe waveform is distorted.
- Autoset does not catch the signal well.
- The date and time settings are not correct.
- The accuracy does not match the specification.
- APPENDIX
- INDEX
GDS-200 & GDS-300 Series User Manual
100
Touch Sounds
Background
When turned on, the Touch Sounds function
will produce a buzzer sound when a button is
pressed on the touch screen. By default the
buzzer sound is turned off.
Press Utility>System>Touch Sounds and
toggle Touch Sounds on/off.
Erase Memory
Background
The Erase Memory function will delete all
waveform and setup files from the internal
memory.
Press Utility>System>Erase Memory and press
OK to erase the memory.
Configure the Hardcopy Function
Background
The Hardcopy function is a quick save function.
Each time the Hardcopy Save key is pressed,
according to the Hardcopy setting, an image,
waveform or setup file is saved.