Datasheet

PANEL INTRODUCTION
Ethernet
M.
OPENWAVE CONNECTION SOFTWARE
4 Channel Model
2 Channel Model
The GDS-1000B Series oscilloscope, via the OpenWave connection
software developed by GW Instek, can connect with the PC. Users,
after installing USB driver under Windows interface, can connect
GDS-1000B with the PC through USB cable and OpenWave
software. Waveform interpretation and retrieval can be done from
the PC end. Data retrieval and storage can better facilitate users
in processing analysis. OpenWave connection software is indeed
a very powerful tool for engineers to compile reports or to
integrate systems.
GDS-1102B
GDS-1202B
GDS-1072B
100MHz
200MHz
70MHz
GDS-1104B
GDS-1074B
100MHz
70MHz
GDS-1054B 50MHz
1. Hardcopy key
2. Autoset, Run/Stop, Single &
Default keys
3. Zooming Controls
4. Trigger controls
5. Math, Reference & Bus keys
6. Probe calibration output
7. USB Host port
8. Menu off key
9. USB device port
10. LAN port
11. Go-NoGo output
12. Calibration output
1
3
4
6
2
7
5
8
9
10
11
12