User Manual User Manual

GDM-8261 User Manual
112
4. Move the cursor to the channel
using the Left/Right key, and
change the value using the
Up/Down key.
HOLD TRIG
Range
101 ~ 118
5. When finished, press the Enter
key. The End (Maximum)
channel setting appears.
AUTO
ENTER
6. Move the cursor to the channel
using the Left/Right key, and
change the value using the
Up/Down key.
HOLD TRIG
Range
101 ~ 118, (must be equal to or greater
than the Start (Min) channel)
7. When finished, press the Enter
key. The Timer setting appears.
AUTO
ENTER
8. Move the cursor to the time
setting using the Left/Right key,
and change the value using the
Up/Down key.
HOLD TRIG
Range
1ms ~ 9999ms
9. Press the Enter key. The loop
(step) Count setting appears.
AUTO
ENTER