Instruction Manual

GDS-2000A
55
Display demo board signal
The demo board can be used to display 8 types of
analog signals, 7 types of digital signals, FM and
video signals. Please follow the procedure listed
below to display each signal in sequence.
Display Autoset mode (Analog Mode 1)
Step
1. Press the Test key on the front
panel of the GDS-2000A.
2. Press the Demo button.
3. Press the Down button to select
Analog Mode 1. A screen
confirming Analog Mode 1 is
selected as shown on the next page
appears.
4. Press the Run button.