Instruction Manual

GDS-2000A
53
Software installation
Step
1. Insert the USB memory stick with
GDB03DemoMode.gz into the
USB port on the front panel of the
GDS-2000A.
Note
z GDS2kAGDB03DemoMode.gz comes
from the
GDS2kAGDB03DemoMode.zip file.
When you unzip the zip file, two files
are generated. One is
GDS2kAGDB03DemoMode.gz for the
software installation and the other is
this user manual in PDF format.
z Make sure the firmware version is
V1.09 or higher.
2. Press the Utility key.
3. Select File Utilities from the bottom
menu.
4. Use the Variable knob to select the
USB memory stick and then press
the Select button.
Up Down