Datasheet

The GBM-3000 series offers two display modes to facilitate users in
maximizing the benefits of their measurements – Standard mode: The
main measurement parameters (three combinations: R+V/R/V) and
parameter settings for the related measurements can be displayed
simultaneously. This mode is applicable to R&D design and engineering
certification. Simple mode: Big numerical display only shows the results
of main measurement parameters to increase the visibility of observations.
This mode is suitable for production measurements.
TWO DISPLAY MODES
A.
Standard Mode
Independent HI/LO Setting
(Setting conditions and R+V measurement parameters)
Simple Mode
Separate & Totally Judgement
(R+V measurement parameters)
the status of the production process to be clearly observed and
retained in real time without any manual calculation or connection to
the computer. After the measurement is completed, the result can be
transferred to the computer through flash drive for long-term storage
and subsequent analysis.
the results of the final determination, the results of individual
measurement parameters are also provided for subsequent actions.
Statistical Function
Finally, the GBM-3000 series provides a variety of practical and
standard-equipped interfaces including RS-232C/USB device/
Handler, which are for measurement result collection in the
remote program control or collocating with system integration
for external trigger measurement through PLC.
D.
COMPREHENSIVE STANDARD INTERFACES
C.
EXCELLENT SUPPLEMENTARY MEASUREMENT CAPABILITY
In addition to providing accurate measurements, the ability of the
GBM-3000 Series to supplement the measurement of production lines
is also a major feature of the series. For example, the ability to detect
disconnect/contact. The display screen can clearly show bad contact
of the test lead (probe).The series can store up to 10,000 lots of
measurement data and has the statistical calculation function to allow
Disconnect/Contact Display
INDEPENDENT GO/NOGO DETERMINATION
B.
The GBM-3000 series provides independent HI/LO determination
settings for both voltage and resistance and can be set according to
the required mode, such as SEQ, PER or ABS. In addition to displaying