User Manual

GDS-3000 Serial Decode User Manual
6
Do not dispose electronic equipment as unsorted
municipal waste. Please use a separate collection
facility or contact the supplier from which this
instrument was purchased.
Safety Guidelines
General
Guideline
CAUTION
 Make sure the BNC input voltage does not
exceed 300V peak.
 Never connect a hazardous live voltage to the
ground side of the BNC connectors. It might
lead to fire and electric shock.
 Do not place any heavy object on the GDS-3000.
 Avoid severe impact or rough handling that
leads to damaging the GDS-3000.
 Do not discharge static electricity to the GDS-
3000.
 Use only mating connectors, not bare wires, for
the terminals.
 Do not block the cooling fan opening.
 Do not perform measurement at a power source
or building installation site (Note below).
 Do not disassemble the GDS-3000 unless you
are qualified.
 Ensure a proper ground is used at all times with
the instrument.