User Manual

MEASUREMENT
25
39. From the side menu choose the
SCLK, SS, MOSI and MISO inputs.
SCLK
CH1~4
SS
CH1~4
MOSI
OFF, CH1~4
MISO
OFF, CH1~4
Set the Threshold
40. Press Threshold from the bottom
menu.
41. Press Select from the side menu.
Choose SCLK, SS, MOSI or MISO
line thresholds.
Range
SCLK, SS, MOSI, MISO
42. Press Threshold from the side menu
and configure the threshold.
Threshold
-10V~10V
To set to TTL levels (1.4V), press Set to
TTL.
To set to ECL levels (-1.3V), press Set
to ECL.
Protocol
Configuration
The Configure menu sets the data line logic level,
SCLK edge polarity, word size and bit order.
43. Press Configure from the bottom
menu.
44. From the side menu select SCLK edge, SS logic
level, MOSI logic level, MISO logic level, word
Size and Bit order.