User Manual

MEASUREMENT
23
26. From the side menu Press Select to
choose SCLK or SDA thresholds.
Range
SCLK, SDA
27. Press Threshold from the side menu
and configure the threshold.
Threshold
-10V~10V
To set to TTL levels (1.4V), press Set
to TTL.
To set to ECL levels(-1.3V), press Set to
ECL.
Include R/W in
address
28. Press Include R/W in address from
the bottom menu.
29. From the side menu select Yes or
No.
R/W in
Address
Yes, No
Bus Display
30. Press Bus Display from the bottom
menu.
31. Choose to display Hex or Binary
data on screen.
Range
Hex, Binary
Event Table
32. Pres Event Table from the bottom
menu.